manualshive.com logo in svg

Whisper Power 12 VDC-2000 VA, User Manual

Share
Download
Whisper Power 12 VDC-2000 VA User Manual Download Page 6

6       WhisperPower Inverter / Battery Charger

   

FCC and EMC INFORMATION 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules (for 120V models) and comply with the CE EMC Standard 
on 230V models. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of the following 
measures: 

•  Re-orient or relocate the receiving antenna. 

•  Increase the separation between the equipment and the receiver.  

•  Consult the dealer or an experienced radio/TV technician for help. 

LIMITATIONS ON USE 

Do not use in connection with life support systems or other medical equipment or devices. 

   

Summary of Contents for 12 VDC-2000 VA





































Reviews:

No comments

Brands by name

Popular brands

Load more brands