manualshive.com logo in svg

Whisper Power 12 VDC-2000 VA, User Manual

Share
Download
Whisper Power 12 VDC-2000 VA User Manual Download Page 19

      

WhisperPower Inverter / Battery Charger

         

19

Unit Setting Function Chart

Unit Setting

Display

Description and Available Setting 

Inverter

 : Use as Inverter only. No By-Pass functions.

(Default)

: Auto Backup. Inverter automatically turns ON when AC 

Blackout. 

 : Manual Backup. When AC Blackout occurs, Inverter has to be 

manually turned ON by using the ‘Power’ button’ on either the 
Display panel or the ‘Power’ button on the Main unit

: Inverter function is disabled. No AC backup when AC Blackout.

Load Sense

(Default)

: Continuous AC Output when inverter is ON 

10 : Continuous AC Output when inverter is ON and AC load is > 10W

15 : Continuous AC Output when inverter is ON and AC load is > 15W

20 : Continuous AC Output when inverter is ON and AC load is > 20W

25 : Continuous AC Output when inverter is ON and AC load is > 25W

Battery Low 
Disconnect      

10.5

Battery Low Disconnect Voltage selectable ranges is 10.5 - 12.0V (0.1V steps)

(Default voltage is set to 10.5V

Battery Low 
Warning

11.0

Battery Low Warning Voltage selectable ranges is 11.0 - 12.5V (0.1V step)

(Default voltage is set to 11.0V

Battery Low 
Recovery

12.0

Battery Low Recovery Voltage selectable ranges is 11.5 - 13.0V (0.1V step)

(Default voltage is set to 12.0V

Audible 
Buzzer

(Default)

: Buzzer is enabled. Unit buzzes when Warning or Error 

occurs. 

: Buzzer is disabled. Unit does not buzz when Warning and Error occur.

AC Charger

 (Default)

: AC Charger is enabled. Charge battery when AC Input is 

available. 

: AC Charger is disabled. No battery charging when AC Input is available.

Battery Type

(Default)

: GEL Battery, default Bulk Charge/Float Voltage is 14.2V/13.8V 

: AGM Battery, default Bulk Charge/Float Voltage is 14.3V/13.4V

: Flooded Battery, default Bulk Charge/Float Voltage is 14.4V/13.5V

: Lithium Battery, default Bulk Charge/Float Voltage is 13.9V/13.5V

: Program, default Bulk Charge/Float Voltage is 13.8V/13.2V

: Power Supply Mode, Default Power Supply Voltage 13.8V

Bulk Current

100

80

12V/3000W Models

: Selectable Ranges 100A, 80A, 60A, 40A, 25A 

(Default 

100A)

.

12V/2000W Models

: Selectable Ranges 80A, 60A, 40A, 20A, 10A 

(Default 

80A)

.

Bulk/Absorpt-
ion Voltage

  14.2

Bulk/Absorption voltage is based on the battery type chosen. All battery 
types have selectable ranges of 13.8 – 14.8V. 

(Default on GEL Battery is 

14.2V 

Summary of Contents for 12 VDC-2000 VA





































Reviews:

No comments

Brands by name

Popular brands

Load more brands