Whirlpool WFC7500VW0, User Manual

Page: 27 / 90

3-9
Prewash
Prewash is an 18-minute soak phase that is
added before the main wash. During prewash,
there is only a small amount of tumbling.
Extra Rinse
An extra rinse can be used to aid in the removal
of detergent or bleach residue from garments.
This option provides an additional rinse with
the same water temperature as in the normal
rinse. You may select or deselect by pressing
EXTRA RINSE.
Wrinkle Release
Use this option to increase the quantity of
incoming water and decrease the spin speed
and duration in the rinse period. The last spin
phase will have a lower spin speed and last a
shorter time.
Extended Spin
Use this option to increase the final spin period
by 1 minute during the final spin.
Gentle Spin
Each cycle has a preset spin speed. To reduce
the final spin speed, select the GENTLE SPIN
button.
Wash Temp
Each cycle has a preset water temperature
setting. To change the water temperature, se -
lect the WASH TEMP button until the desired
setting is illuminated.
Select a water temperature based on the type
of load you are washing. Use the warmest
wash water safe for fabrics. Follow garment
label instructions.
The water temperature for all rinse cycles is
cold. Cold rinses save energy.
Temperature Guide
Wash Water Temperature Suggested Fabrics
HOT Whites and pastels
Heavy soils
WARM Bright colors
Moderate to light soils
COLD Colors that bleed or fade
Light soils
In wash water temperatures colder than 60°F
(15.6°C), detergents do not dissolve well. Soils
may be difficult to remove.
Auto Temp Control
ATC (Auto Temp Control) electronically senses
and maintains a uniform water temperature.
ATC regulates incoming hot and cold water.
The ATC is automatically turned ON when a
cycle is selected. See Preset Cycle Settings
table in “Cycles.”
ATC works for the wash temperature with •
Warm and Cold settings.
The Cold rinse temperatures depend on the
•
cold water at the faucet.
Temperature Guide