31
EN
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
The appliance needs descaling.
The descaling procedure described in section “Des-
cale” needs to be performed and/or the filter needs
replacing or removing as described in section “Water
softener filter”.
The tubes inside the milk container (D)
must be cleaned.
Turn the froth adjustment dial (D1) to CLEAN (fig. 21).
The machine must be descaled.
The descaling procedure described in section “Des-
cale” needs to be performed.
The auto-start function is enabled.
To disable the function, proceed as described in sec-
tion “Auto-start
”.
Energy saving is enabled.
To disable energy saving, proceed as described in sec-
tion “Energy saving
”.
CLEANING UNDERWAY
PLEASE WAIT
The appliance has detected impurities in
its internal circuits.
Wait for the appliance to be ready for use again and
reselect the required beverage. Contact Customer
Services if the problem persists.
MACHINE TOO HOT
Using the stirrers continuously for long pe-
riods may cause the appliance to overheat
Wait for the appliance to cool down.
Summary of Contents for W11 CM145
