Whirlpool W11 CM145, Instructions For Use Manual, Page: 18 / 36

18
To disable or enable "Energy Saving", proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until ENERGY SAVING ap-
pears on the display (B);
3. Press to enable- or disable- en-
ergy saving.
4. Press to go back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.
Coffee temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until COFFEE TEMPERA-
TURE appears on the display (B) together with the current
selection (LOW, MEDIUM, HIGH or MAXIMUM);
3. Press to select the required temperature;
4. Press
to go back to the homepage.
A different temperature can be set for each profile (see section
“Memorising your personal profile”).
Water hardness
For instructions on setting water hardness, see section “Setting
water hardness”.
Selecting the language
To modify the language of the display (B), proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until SET LANGUAGE ap-
pears on the display;
3. Press : press or to display and select the flag
corresponding to the required language;
4. Press twice to go back to the homepage.
Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until BEEP appears on the
display (B);
3. Press to enable- or disable- the
beep;
4. Press to go back to the homepage.
Cup light
This function enables or disables the cup lights (A18). The lights
come on each time coffee beverages or hot milk is delivered and
during each rinse cycle.
To disable or enable this function, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until CUP LIGHTING ap-
pears on the display (B);
3. Press to enable- or disable- the
cup lighting;
4. Press to go back to the homepage.
The interior lighting (A6) comes on when the appliance is turned on.
Demo mode
By enabling this mode, the main functions of the machine are
shown on the display:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until the display shows
DEMO MODE;
3. Press to start the demo;
4. To exit from the DEMO MODE, first turn the appliance off
by pressing the button (A7), (fig.9). Press again the
button to go back to the homepage.
Default values
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until DEFAULT VALUES
appears on the display (B). Press ;
3. Press RESET ALL to reset all the profiles to the original pa-
rameters, otherwise select the required profile (e.g. USER 1);
4. RESET DEFAULT VALUES : press to confirm (or
to leave the parameters unaltered);
5. DEFAULT VALUES RESET : press to confirm and
to go back to the homepage.
Statistics
This displays statistics relating to the machine. To display the
statistics, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or
(B8) until STATISTICS appears
on the display (B);
3. Press to verify all the available statistics by pressing
or ;