5
Tools Needed:
8" (200 mm)
8" (200 mm) or 10" (250 mm)
Flat-Blade Screwdriver
Phillips Screwdriver
or 10" (250 mm)
Adjustable Wrench
Pipe Wrench
that opens to 1" (25 mm)
TORX
®
T-20
®†
Security
1" (25 mm) Hex-Head
1⁄4" Socket Wrench
Pliers (that open to
Screwdriver or Bit
Socket Wrench
1
9
/
16
" [39 mm])
Level
Utility Knife
1/4" (6 mm) Nut Driver
27" (686 mm)
Wood Block
Caulk Gun and Caulk
Vent Clamps
Pipe-Joint Compound
Putty Knife
(for installing new exhaust vent)
suitable for gas type
Flashlight (optional)
1" (25 mm)
Ruler or Measuring Tape
Open-End Wrenches
INSTALLATION REQUIREMENTS
†
®
TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.
Parts Supplied:
Foot Boots (4)
Leveling Legs (4)
Tools and Parts
To locate factory specified replacement parts in your area,
contact the dealer from whom you purchased your dryer.
