31
Code
Explanation
L. 00
PRICE SUPPRESSION OPTION
This option is either Selected ‘ON’ or Not Selected
‘OFF’. This option causes the customer display to
show ‘AVAILABLE’ or ‘ADD’ rather than the amount
of money to add. (Used mainly in debit installations.)
L. 00
Not Selected ‘OFF’.
L. PS
Selected ‘ON’. Press the COLORS/DELICATES button
once for this selection.
• Press the PERM PRESS button once to advance
to next code.
n. CE
CLEAR ESCROW OPTION
This option is either Selected “ON” or Not Selected
“OFF.” When selected, money held in escrow for 30
minutes without further escrow or cycle activity will
be cleared.
n. 00
Not Selected “OFF.”
n. CE
Selected “ON.”
• Press the COLORS/DELICATES button once
to change this selection.
• Press the PERM PRESS button once to advance
to next code.
U. 00
PENNY INCREMENT OFFSET
U. 00
This represents the penny increment price offset
used in Generation 2 (Enhanced Debit) 9160 models.
Choose from 0–4 pennies by pressing the COTTON/
WHITES button.
• Press the PERM PRESS button once to advance
to next code.
If cycle counter (9 0C) is selected, the following is true:
1 00
Cycles in HUNDREDS
1 02 = 200
2 00
Cycles in ONES
2 25 = 25
TOTAL CYCLES = 225
This is “VIEW ONLY” and cannot be cleared.
• Press the PERM PRESS button once to advance
to next code.
If money counter (1.0C or 1.C0) is selected, the following
is true:
3 00
Dollars in HUNDREDS
3 01 = $100.00
4 00
Dollars in ONES
4 68 = $ 68.00
5 00
Number of CENTS
5 75 = $ 00.75
TOTAL = $168.75
END of SET-UP PROCEDURES
TO EXIT FROM SET-UP MODE
1.
Close the service access door.
2.
Disconnect dryer from power before reinstalling the AA1
connector, if it was removed.
3.
Remove the manual set-up card.
4
. Wait two minutes without activating any dryer inputs.
5.
Disconnect and then reconnect power.
Code
Explanation
C. 20
VALUE OF COIN 2
C. 20
This represents the value of coin 2 in number
of nickels: 20 = $1.00.
• By pressing the COTTON/WHITES button, there is
an option of 1–199 nickels.
C. 05
When a Gen 2 card reader is used, this code represents
the value of top off in nickels. C.05 = $0.25.
• Press the PERM PRESS button once to advance
to next code.
d. 00
COIN SLIDE OPTION
This option is either Selected “ON” or Not Selected
“OFF.” Replacement of meter case will be needed for
coin slide mounting.
d. 00
Not Selected ‘OFF’.
d. CS Selected ‘ON’.
NOTE:
This option needs to be set to ‘00’ unless the
meter case has been changed to accept a coin slide
device.
Press the COLORS/DELICATES button 3 consecutive
times for this selection. When coin slide mode is
selected, set ‘b.’ equal to value of vend price in
nickels. Set ‘6 XX’ (REGULAR CYCLE PRICE) and
‘3.XX’ (SPECIAL CYCLE PRICE) to number of slide
operations.
NOTE:
If the installer sets up ‘CS’ on a coin drop
model, the dryer will not register coins inserted.
• Press the PERM PRESS button once to advance
to next code.
E. 00
ADD COINS OPTION
This option is either Selected ‘ON’ or Not Selected
‘OFF’. This option causes the customer display to
show the number of coins (coin 1) to enter, rather
than the dollars-and-cents amount.
E. 00 Not Selected ‘OFF’.
E. AC Selected ‘ON’.
Press the COLORS/DELICATES button 3 consecutive
times for this selection.
9160 MODELS ONLY: In enhanced debit mode, this
option is not selectable.
• Press the PERM PRESS button once to advance
to next code.
J. Cd
PAYMENT MODE (COIN/DEBIT OPTION)
J. Cd
Both coin and debit selected. Press the COLORS/
DELICATES button 3 consecutive times to change
this selection.
J. C_
Coins selected, debit disabled. Press the COLORS/
DELICATES button 3 consecutive times to change
this selection.
J. _d
Debit Card selected, coin disabled (default for 9160
models). This selection must be used for free vend.
Press the COLORS/DELICATES button 3 consecutive
times to change this selection.
J. Ed
Enhanced Debit is self-selected when a Generation
2 card reader is installed in the dryer. The “Ed” option
cannot be manually selected or deselected.
• Press the PERM PRESS button once to advance
to next code.
ELECTRONIC CONTROL SETUP INSTRUCTIONS
