Whirlpool AWM05801, User Manual

Page: 67 / 73

Your machine is equipped with the systems which are capa-
ble of both taking necessary precautions and warning you in
case of any breakdown by means of continuous self-check-
ing during washing operations.
(*) See the chapter regarding maintenance and cleaning of
your machine.
67
CHAPTER -10: AUTOMATIC FAULT WARNINGS AND
WHAT TO BE DONE
FAILURE
CODE
FAILURE
INDICATOR
PROBABLE
FAILURE
THE PROCESS TO BE
DONE
E01 The start/
pause light
blinks.
The door is not
shut properly.
Shut the door properly so
that you hear the click. If the
problem persists, turn off the
machine unplug and apply
to the nearest authorized
service immediately.
Err 02 The program
ready light
blinks.
The water level
in your machine
is below heater.
The pressure of
your water sup-
ply may be low
or locking.
Turn on the tap to the end.
Water may be cut, check
it.If the problem is still
continuing,your machine will
automatically stop after a
while.Unplug your machine,
turn off the tap and apply
to the nearest authorized
service.
Err 03 The start/
pause light
and program
ready light
blinks .
The pump has
failed or the
pump filter is
obstructed.
Clean the pump filter.If the
problem persists,apply to the
nearest authorized service.
(*)
Err 04 The program
end light
blinks .
Communication
error
Shut down your machine
and unplug. Turn off your
tap and apply to the nearest
authorized service.