Whirlpool AWM05801 User Manual Download

Page: 37 / 73

CHAPTER -5: PRELIMINARY PREPARATION FOR

LAUNDERING (SEPARATING LAUNDRIES)

•

Your laundry has product labels on them that specifiy

their specifications. Wash or dry your laundry

according to the specifciations on the product label.

•

Separate your laundries according to their types

(cotton, synthetic, sensitive, wool etc.), their

temperatures (cold, 30°, 40°, 60°, 90°) and degree of

contamination (slightly stained, stained, highly stained).

•

Never wash your coloured and white laundry together.

•

Wash your coloured laundries separately in the first

washing as they may bleed.

•

Ensure that there are no metallic materials on your

laundries or in the pockets; if so, take them up.

CAUTION: WARNING: Faults that will

emerge in case of penetration of foreign

substances into your machine are not

included within the scope of warranty.

•

Zip up and button up your laundries.

•

Remove the metallic or plastic hooks of tulle curtains

or curtains or place them in a washing net or bag and

then muzzle them.

•

Reverse textiles such as pants, knitwear, t-shirt and

sweat suit.

•

Wash socks, handkerchief and suchlike small

laundries in a washing net.

DGV

DSH

SFH

DGV

DSH

SFH

DGV

DSH

SFH

DGV

DSH

SFH

DGV

DSH

SFH

DGV

DSH

SFH

DGV

DSH

SFH

DGV

DSH

SFH

DGVDSHSFHS

Summary of Contents for AWM05801










































































Search results

Summary of Contents for AWM05801

Reviews:

Related manuals for AWM05801

Brands by name

Popular brands

Whirlpool AWM05801, User Manual

Search results

Summary of Contents for AWM05801

Reviews:

Related manuals for AWM05801

Brands by name

Popular brands