Whirlpool AWM05801, User Manual

Page: 57 / 73

57
CHAPTER -7: MAINTENANCE AND CLEANING OF YOUR
MACHINE (WATER INLET FILTERS)
On the tap part of your machine’s water inlet hose and at the
ends of water inlet valves, there are filters to prevent entrance
of the dirt and foreign materials in the water to the machine. If
the machine is unable to receive sufficient water
although your water tap is opened, these filters
should be cleaned.
• Remove the water inlet hose.
• Remove the filters found on the water inlet
valves by using a pincer and wash thoroughly
with a brush.
• Clean the filters of the water inlet hoses located
on the tap side by removing manually together
with the seal.
• After you clean the filters, you can fit them the
same way as you have removed.
CAUTION:
Filters of water inlet valves may be
clogged due to contaminated water faucet
or lack of necessary maintenance or valves
may be broken down, causing water leaking
into your machine continuously.
The breakdowns that may arise due to
these reasons are out of the scope of
warranty.