Whirlpool AWM05801, User Manual

Page: 40 / 73

40
The quantity of the detergent that you will fill in your machine
depends on the following criteria:
• Your detergent consumption will change according to the
dirtiness level of your clothes. For your slightly dirty clothes,
do not pre-wash and put a small amount of detergent in the
compartment no.2 of the detergent drawer.
• For your excessively dirty clothes, select a program with
pre-washing, fill ¼ portion of the detergent you will put in
compartment 1 in the detergent drawer and the remaining
portion in compartment 2.
• In your machine,use the detergents developed especially for
automatic washing machines. The quantities that will be used
for your clothes are written on the packing of the detergents.
• As the hardness of your water increases, the amount of the
detergent to be consumed will also increase.
• As the amount of your clothes increases, the amount of the
detergent to be consumed will also increase.
• Fill your softener in the softener compartment in your
detergent drawer. Do not exceed the MAX level. Otherwise,
the softener will diffuse in the washing water via the siphon.
• The softeners with high density should be diluted with some
water before filling in the drawer. That is because the softener
with high density obstructs the siphon and prevents the flow
of the softener.
• You can use fluid detergents in all programs without pre-
washing. For this, mount the fluid detergent level plate in the
second compartment of the detergent drawer and arrange the
amount of fluid detergent according to the levels on this plate.
CHAPTER -5: PRELIMINARY PREPARATION FOR
LAUNDERING (ADDING DETERGENT INTO MACHINE)