Whirlpool ASH09000R, Installation Manual

Page: 36 / 96

33
Step four: outlet pipe
Step five: connect the pipe of indoor unit
Note:
● Pay attention to dust prevention
and take relevant safety measures
when opening the hole.
1. The pipe can be led out in the
direction of right, rear right, left or
rear left.
1. Aim the pipe joint at the corresponding
bellmouth.
2. Pretightening the union nut with hand.
3. Adjust the torque force by referring to the following sheet. Place the open-end
wrench on the pipe joint and place the torque wrench on the union nut. Tighten
the union nut with torque wrench.
right
rear right
pipe joint union nut pipe
left rear left
left
cut off
the hole
right
2. When select leading out the pipe
from left or right, please cut off the
corresponding hole on the bottom
case.
Indoor
5-10°
70
55
Installation of indoor unit
Outdoor