Whirlpool APARTMENT MAINTENANCE SERIES, Service Manual

Page: 28 / 132

20
5. The rear panel can be tilted back for additional access to components at rear of machine by
twisting the rear panel support 90°, and then tilting the rear panel back. (Fig. 3-11)
REAR PANEL SUPPORT
REASSEMBLY NOTES
When reassembling the cabinet make sure the following steps are taken:
1. When reinstalling the rear panel support, press in on the rear panel and rotate the support
to lock the panel in position. (Fig. 3-12)
2. The cabinet front flange must be under the washer base. (Fig. 3-13-A)
3. Holes in the cabinet side flange must be placed over the tabs in the washer base.
(Fig. 3-13-B)
REAR PANEL SUPPORT
A
B
TABS
SERVICING THE TUB AND BASKET
1. To service the tub and basket, the cabinet must be removed.
2. If it is necessary to remove the inner basket, begin by removing the tub ring by unsnapping the
slots from the tabs on the tub. There are a total of eight tabs, one of which is a locator tab and
has a narrower slot than the others.
(Fig. 3-14)
LOCATOR TAB
Fig. 3-11
Fig. 3-14
Fig. 3-13
Fig. 3-12