4. CLEANING
AND MAINTENANCE
IMPORTANT
ALWAYS MAKE SURE THAT THE APPLIANCE IS UNPLUGGED AT THE
MAINS BEFORE CARRYING OUT ANY CLEANING OR MAINTENANCE
OPERATIONS
4.1. ROUTINE OPERATIONS
Clean the inside of the appliance carefully with warm water and neutral soap. Rinse and dry thoroughly.
Ensure that the condensation water drain is free from obstructions: clean if necessary.
Check cleanliness and condition of the door gaskets.
Check the state of the power supply wire: it must not have any defects that could compromise its insulation.
ATTENTION !
AVOID USING AGGRESSIVE DETERGENTS IN GENERAL.
DO NOT USE WIRE PADS, BRUSHES OR METAL SCRAPERS ON THE
STAINLESS STEEL PARTS
4.2. IDLE TIME
In the event of prolonged idle periods, clean the appliance in the way described above.
Leave the doors ajar so that air can circulate and undesirable smells are avoided.
Cover the compartment containing the control mechanisms to protect it from dust.
ATTENTION !
DURING CLEANING AND/OR MAINTENANCE OPERATIONS, TAKE GREAT
CARE NOT TO DAMAGE THE COOLING FLUID CIRCUIT IN ANY WAY
Pagina 29 di 52
