3.2. USE
Press the illuminating master switch to turn on the appliance. The push button illuminates to confirm that the
appliance is on.
After approximately 3 seconds, the dial of the telethermostat will illuminate to indicate that the appliance is fully
operational.
If the temperature on the display is higher than “SET” plus the value of hysteresis “r0”, the compressor will cut in
until the “SET” value is achieved.
ATTENTION !
THE APPLIANCE MUST BE IN THE STEADY STATE BEFORE FOOD CAN BE
STORED IN IT
3.3. DEFROSTING
Defrosting is carried out automatically every 6 hours and lasts for a maximum of 30 minutes.
During this stage, the temperature that appear on the display remains stopped.
A manual defrosting cycle can be used by pressing the
push button for at least 2 seconds.
ATTENTION !
DO NOT USE MECHANICAL DEVICES OR OTHER MEANS TO ACCELERATE
THE DEFROSTING PROCESS
Pagina 27 di 52
