The controls on the telethermostat are shown in the illustration below.
POS.
DESCRIPTION
FUNCTION
Programming key “+” e “-“
- Used to view the maximum temperature
reached. In the programming mode it is used to scroll
the parameter codes or to increase their value.
- Used to view the minimum temperature
reached. In the programming mode it is used to scroll
the parameter codes or decrease their value.
SET
Key for viewing SET POINT and
PROGRAMMING
Used to view or alter SET POINT. In the
programming mode it is used to select a parameter or
confirm a value.
START DEFROSTING key
Used to start the DEFROSTING function (press on
the symbol)
DEFROSTING LED
Has double status:
ON
– Defrosting in progress
FLASHING
– Programming mode (flashing with
COMPRESSOR LED) or dripping in progress
COMPRESSOR LED
Has double status:
ON
- Compressor in operation
FLASHING
– Programming mode (flashing with
DEFROSTING LED) or delay against closely
spaced starts in progress
ATTENTION !
DO NOT USE ELECTRICAL APPLIANCES INSIDE THE CONSERVATION
COMPARTMENTS
Pagina 26 di 52
