GB10
FAST PREHEATING
1.
Turn the “Functions” knob to the symbol
to select the fast preheating function.
2.
Confirm by pressing
: the settings are shown on the display.
3.
If the proposed temperature is that desired, press button . To change the temperature, proceed as
described in previous paragraphs. The message
PRE
appears on the display. When the set
temperature is reached, the corresponding value (e.g. 200°C) appears on the display and the acoustic
signal sounds. At the end of preheating, the oven automatically selects the conventional function
.
At this point food can be placed in the oven for cooking.
4.
If you wish to set a different cooking function, turn the “Functions” knob and select the desired
function.
SETTING COOKING TIME
This function can be used to cook food for a set length of time, from a minimum of 1 minute to the
maximum time allowed by the selected function, after which the oven switches off automatically.
1.
Once the temperature is confirmed, the symbol
flashes.
2.
Turn the adjustment knob to display the desired cooking time.
3.
To confirm the cooking time, press button .
The oven automatically confirms your selection 10 seconds after the last operation.
SETTING END OF COOKING TIME/START DELAYED
IMPORTANT: the start delayed setting is not available for the following functions: FAST
PREHEATING, BREAD/PIZZA, GENTLE CONVECTION BAKE.
N.B.: with this setting, the selected temperature is reached in a more gradual way, so cooking times
will be slightly longer than stated in the cooking table.
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and
59 minutes. This can only be done once cooking time has been set.
After setting cooking time, the display shows the end of cooking time (for example 15:45) and the
symbol
flashes.
To delay the end of cooking time, and thus also the cooking start time, proceed as follows:
1.
Turn the “Browse” knob to display the time you wish cooking to end (for example 16:00).
2.
Confirm the selected value by pressing button
: the two dots of end of cooking time flash,
indicating that the setting has been made correctly.
3.
The oven will automatically delay the start of cooking so as to finish cooking at the set time.
At any time, however, set values (temperature, grill setting, cooking time) can be changed using
button to go back, followed by the “Browse” knob to change values and button to confirm.
INDICATION OF THE RESIDUAL HEAT INSIDE THE OVEN (IF PRESENT)
If at the end of cooking, or when the oven is switched off, the temperature inside the oven is high, the
display on some models shows the message HOT together with the current temperature. Once the oven
chamber has cooled down, the display shows the current time again.
