- 14 -
REMOVING A SURFACE ELEMENT TERMINAL BLOCK
1.
Unplug the range.
2.
Remove the surface element from the terminal block.
3.
Remove the screw from the terminal block you wish to service, unhook it from the cooktop,
and remove it.
4.
Cut the two wires approximately 2
"
- 3
"
from the edge of the terminal block.
MAINTOP
CUT WIRES
SURFACE ELEMENT
TERMINAL BLOCK
SCREW
2" - 3"
5.
Use the “Surface Unit Terminal Block Replacement” (
#330031
), and follow the instructions
contained in the package to install the new terminal block.
TESTING A SURFACE ELEMENT TERMINAL BLOCK
1.
Visually inspect the terminal block for the following defects:
a) Cracked block.
b) Melted block.
c) Internal arcing (carbon buildup around terminals).
d) Burnt or charred wires.
e) Loose connectors.
Summary of Contents for 4322453
Page 1: ...ELECTRIC RANGES 4322453 ...
