- 27 -
The Broil Function
The Broil function operates just like the Bake function, except that only the Broil element operates
during the cycle. The cycle uses the normally-closed contacts of the Bake relay to provide the 240
VAC circuit. The Bake element does not operate during the Broil mode.
Use the following procedure to set the Broil function:
1.
Press the Broil keypad and
500˚
will be displayed. If you wish to “Custom Broil,” press the TEMP
Up (
s
) and Down (
t
) keypads until the desired temperature is displayed.
2.
Press the START/ENTER keypad.
When normal broiling is selected, (oven door open to the “Broil” position and the oven temperature
set for 500˚), it will take approximately 15 minutes before the oven sensor cycles the oven.
L1
N
W
L2
BU
BK
BU
R
BROIL ELEMENT
V
V
OVEN CONTROL
TRANSFORMER
BAKE RELAY
SENSOR
P1-6
P1-7
P2-2
P5
P2-1
OVEN CONTROL
BROIL RELAY
P3-2
P3-1
The Clean Function
During the oven Clean cycle, the Bake element is used to bring the oven temperature up to
approximately 875˚ (see the following illustration). The Broil element is not used. The oven door
must be locked during the time that temperatures are above 600˚.
Use the following procedure to set the Clean function:
1.
Press the CLEAN keypad and
3:00
will be displayed. The Clean cycle is now set to operate for
three hours. If a different time (between 2 and 4 hours) is desired, press the TEMP/TIME Up
(
s
) and Down (
t
) keypads until the desired time is displayed.
2.
Press the START/ENTER keypad and the following events will occur:
•
The Bake relay will close, and provide 240 volts AC through the Bake element. The Broil
element is not used during the Clean cycle so that the oven temperature does not rise too
quickly and cause porcelain damage to the oven liner.
L1
L2
R
BK
R
R
BAKE ELEMENT
OVEN CONTROL
BAKE RELAY
P2-4
P2-1
OVEN CONTROL
BROIL RELAY
P3-4
P3-1
Summary of Contents for 4322453
Page 1: ...ELECTRIC RANGES 4322453 ...
