Whip Mix Pro 200 Series, Operator'S Manual

Page: 9 / 32

9
Pro 200 Series
Furnace Operations Manual
Information Display and Entry
DISPLAY — All information and user prompts will be
shown on the display (four lines, twenty characters each).
SELECTOR KNOB — Turn the Selector Knob left or right
to select menu options or to adjust parameters.
NEXT — Press the Next button to proceed to the next
step within a function or program. (OR just push the
Selector Knob inward to proceed).
LAST — Press this button to return to the preceding step
within a function or program. If a program is not displayed
then the furnace will beep to indicate an error.
TABLE UP — Press the up arrow button to manually
raise the table. Press the up arrow button a second time
and the table will stop.
TABLE DOWN — Press the down arrow button to
manually lower the table. Press the down arrow button
a second time and the table will stop.
The table control button will not operate while a program
is running.
• Immediately After a Previous Program Completes —
Pressing the Selector Knob after a program has
just finished will restart the same program. Or rotate
the
Selector Knob to a new Program selection and
press the Selector Knob to initiate the Program.
Start Program
• Immediately After Power-On Self-Test Completes —
Rotate the Selector Knob to select a Program, then
press the Selector Knob to initiate the Program.
Abort Program
• Press the Abort key on the Keypad. The temperature
will begin dropping to Idle temp and the Table will
automatically lower.