Whip Mix Pro 200 Series, Operator'S Manual, Page: 13 / 32

13
Pro 200 Series
Furnace Operations Manual
Set Program Start Delay
The furnace has a unique feature that allows the operator
to program a delay to occur before the start of all programs.
This delay occurs before the entry time set into each
program begins. This feature may be changed without
affecting the programs or calibrations stored in the furnace.
1. Press the Main Menu button.
2. Select Special Functions , push the Selector Knob
OR press the Next button.
3. Turn the Selector Knob until the second line on the
display reads PROG START DELAY.
4. Press the Next button to look at or change the start
delay time.
5. The display will read TIME = 0.00 or any time delay
previously entered. Turn the Selector Knob to
change the time as desired.
6. Push the Selector Knob OR press the Next button
to save your selection. You will be returned to the
Main Menu automatically.
NOTE: THE DELAY FEATURE SUBTRACTS FROM THE
TIME IT TAKES TO HEAT THE MUFFLE TO THE ENTRY
TEMPERATURE SO THE DELAY TIME MAY APPEAR
SHORTER THAN ORIGINALLY PROGRAMMED. AS AN
EXAMPLE; LET’S ASSUME THE DELAY IS SET FOR 30
MINUTES, THE ENTRY TEMPERATURE IS 500° C, AND
THE TIME IT TAKES THE FURNACE TO REACH 500° C
FROM THE POINT WHICH YOU ENTERED THE DELAY
IS 15 MINUTES. THE FURNACE WOULD COUNT DOWN
15 MINUTES TO THE BEGINNING OF THE PROGRAM
AND THEN WOULD BEGIN HEATING TO THE ENTRY
TEMPERATURE. THIS GIVES US A TOTAL OF 30 MINUTES
BEFORE THE TABLE RISES TO THE MUFFLE.
Set Music Volume Level
1. Press the Special Functions button.
2. Turn the Selector Knob until display reads
CHANGE MUSIC VOLUME.
3. Push the Selector Knob OR press the Next key. Continue
to turn the Selector Knob to the desired volume. The
cursor will appear to the left of the volume selected:
4. Rotate the Selector Knob and a sequence of tones
will begin playing to give you an audible reference
for the corresponding sound level. When the volume
level is set to your liking, push the
Selector Knob OR
press the Next button to save your selection. You will
be returned to the Main Menu automatically.
Set to All Capital Text or Mixed
Upper/Lower Case Text Display
1. Press the Special Functions button.
2. Turn the Selector Knob until display reads
CAPITAL LETTER?
3. Push the Selector Knob OR press the Next button.
Select Displayed Language
1. Press the Special Functions button.
2. Turn the Selector Knob until the display reads
SELECT LANGUAGE.
3. Push the Selector Knob OR press the Next button.
4. Choose from the following list of languages:
> English
Francais
Deutch
Italiano
Espanol
4. If you want all Capital Letters displayed, rotate the
Selector Knob to Yes and push the Selector Knob
OR press the Next button. If you do not want all Capital
letters, rotate to No for mixed upper/lower case letters
and press the Selector Knob OR press the Next button.
5. Rotate the Selector Knob until the cursor points to
the desired language and push the Selector Knob
OR press the Next button to save your selection. You
will be returned to the Main Menu automatically.