Whip Mix Pro 200 Series, Operator'S Manual

Page: 14 / 32

14
Pro 200 Series
Furnace Operations Manual
Saving Programs to a Flash Drive
(Exporting)
1. Place the Flash Drive in the USB slot on the left side of
the furnace with the shiny metal contact facing upward.
2. Select the Special Functions item from the Main Menu.
3. Turn the Selector Knob until the display reads
EXPORT PROGRAM , then press the Next button.
4. The display will show Check USB Driver , then
Exporting >>>>>>>
5. The furnace will signal the end of the transfer with
an audible tone.
Transferring User Firing Programs
to Other Furnaces (Importing)
Once you have exported programs to the Flash Drive,
either via the furnace EXPORT PROGRAM function OR
via the PC Software, you can load these programs on a
different furnace or return them to the same furnace.
1. Place the Flash Drive in the USB slot on the left side of
the furnace with the shiny metal contact facing upward.
2. Select the Special Functions item from the Main Menu.
3. Turn the Selector Knob until the display reads IMPORT
PROGRAM , then press the Next button.
4. The display will show Check USB Driver , then
Importing >>>>>>>
5. The furnace will signal the end of the transfer with an
audible tone.