2.
Please make sure that the HVDM supply unit connected to a switched wall socket or similar
switched socket and is in the OFF position.
3.
First disconnect
the turntable from the amplifier / preamplifier or other phonostage.
4. Connect the turntable leads to the whestTHREE observing the colour codes for channel ID.
5. Connect the ‘grounding’ lead from the turntable arm lead to the grounding post on the
whestTHREE.
6. Connect the output of the whestTHREE to the amplifier / preamplifier aux/line input.
The whestTHREE features both balanced and unbalanced outputs
. Please make sure you
only use one of these outputs - either balanced or unbalanced - not both.
Unlike differential balanced outputs that increase output gain by 6dB, the whestTHREE features
'true impedance balanced outputs' which many of today's professional microphones and mixers
use. Please do not be alarmed if the gain is the same as the RCA unbalanced outputs - this is
quite normal. As long as you have a correctly wired balanced interconnect the balancing system