along with noise cancellation will work as it should. The balanced outputs are configured to AES
standards. Some older products built in the USA may be wired incorrectly. Please check your manual.
AES standards for XLR should be wired as
Pin2 HOT Pin3 COLD Pin1 Chassis
.
7. Once you are happy that all inputs and outputs have been connected properly, attach the 2 HVDM
multi-pin cables to the whestTHREE multi-pin chassis sockets. Please make sure CH1 is
connected to CH1 or L.Power CH2 is R. The connectors will 'click' once they are plugged in
properly.
8. Next connect the 3 pin mains cable supplied making sure the HVDM supply switch is in the OFF
position.
'0'