iii)
LOAD - Fig.3 will show the loading values for the corresponding switches. Select the load
(switch the corresponding switch to 'ON') which is appropriate for your cartridge.
iv)
GAIN - Fig.3 will show the gain values for the corresponding switches. Select the gain
(switch the corresponding switch to 'ON') which is appropriate for your cartridge.
MAKE SURE ALL OTHER SWITCH POSITIONS ARE IN THE 'OFF' POSITION
to set the whestTHREE for moving magnet with a load value of 47K ohms:
- set all the switch positions to the ‘off’ position
- slide switch no 8 (LOAD) indicating 47K ohms and switch no.1 (GAIN) indicating 42dB
(MM). Gain switch no.2 maybe required if your MM has a slightly lower output.
to set the whestTHREE for moving coil with a output value of 0.25mV
- set all the switch positions to the ‘off’ position
- slide switch no.1 (LOAD) indicating 100ohm and switch no.6 (GAIN) indicating 65dB
(MC)