Wheatstone E-SAT, Technical Manual

Page: 29 / 126

G E N E R A L I N F O R M A T I O N
page 1 – 21
E-Series Network / Apr 2007
All X-Y crosspoint controllers have similar functions. First, select a DESTINATION
(console fader, recorder, etc.) by turning the DESTINATION knob. By turning the
SOURCE knob, the available inputs are displayed in the 8-character display window and
the TAKE button lights. When the desired input source is scrolled into the display window,
pressing the TAKE button will execute the take command on the downstroke. The TAKE
button light goes off and the desired input source is selected. Note that if the TAKE button
is not pressed in a timeout period of 6-8 seconds, the display will revert to its previous setting.
Some controllers have PROGRAMMABLE buttons to program input sources. To
program the desired input source for a selected button, press the button and hold it for a few
seconds. The display window will displayed <STORED>, and the desired input source will
be stored for this button.
When the SOURCE knob is scrolled to a programmed input source, the associated button
lights to indicate the correspondence between the source and button.
The Ethernet-Based Controllers connect to your LAN via standard UTP CAT5 “straight”
cables terminated with RJ-45 connectors.
E-Series Network / Jan 2008