Wheatstone E-SAT, Technical Manual

Page: 74 / 126

page 3 – 11
E-Series Network / Apr 2007
X P O I N T S O F T W A R E S E T U P G U I D E
Visibility Settings
To view the control surface’s visibil-
ity settings select Configure / E6 / Visibil-
ity Settings menu option, which will
display the form on the right.
By scrolling up and down the “Con-
trol Surface Id” box, choose the appropri-
ate control surface by its unique number.
Then view or modify the settings for X
Controller (faders and switched meter)
and Studio (monitors) by clicking on the
appropriate tab. To modify settings (by
default all signals are visible) click the
Select Subset radio button.
Next highlight the desired source
signal(s) in the left column, then click on
the single right arrow box (>) found be-
tween the columns. In order to make all
signals visible click the double right ar-
row (>>) box found between the col-
umns. The left arrow buttons are to re-
move signal(s) from the visible list found
in the right column. Clicking the Apply
button will save the visibility options.
• Sort by... - User may choose to sort the
displayed signals according to Signal
ID, Signal Name, or Signal Location.
• Subsets - User may create subsets of
signals and apply the subset to indi-
vidual inputs (EQs), studios, etc.
• Apply Settings to All EQ’s - This button takes the selected set of Assigned
Source Signal and applies it to all of the selected control surface’s input
X Controllers.
• Refresh - It is possible for the visibility settings stored with XPoint to be out
of sync with the settings stored in the surface - this button causes the surface
settings to override the current settings as displayed in XPoint (but not the
settings stored with XPoint, unless you use the button and then save your
config).