Wheatstone D-8000, Technical Manual

Page: 24 / 169

page 2 – 4
D-8000 / Jan 2003
D I G I T A L / A N A L O G I N P U T
Hook-Ups
As stated before, all user wiring to and from INDM/INM/IN-8 modules
takes place at DB-25 multi-pin connectors mounted directly beneath each
module on the console mainframe’s bottom pan. There are two connectors
per module: the upper one (towards the console meterbridge) handles
audio inputs; the lower (near the console armrest) control signals. Pinout
drawings on pages 2-8, 2-9 and 2-10 show all wiring connections at a
glance.
INM-8 and INDM-8 Modules
Audio Connections (upper DB-25)
These include analog/digital A and B source inputs and analog/digital
IFB outputs.
Pin 25 – Line A Lt In SH
Pin 24 – Line A Lt In HI
Pin 12 – Line A Lt In LO
Pin 11 – Line A Rt In SH
Pin 10 – Line A Rt In HI
Pin 23 – Line A Rt In LO
Pin 22 – Line B Lt In SH
Pin 21 – Line B Lt In HI
Pin 9 – Line B Lt In LO
Pin 8 – Line B Rt In SH
Pin 7 – Line B Rt In HI
Pin 20 – Line B Rt In LO
Pin 19 – IFB Out SH
Pin 18 – IFB Out HI
Pin 6 – IFB Out LO
Pin 5 – IFB AES/SPDIF Out SH
Pin 4 – IFB AES/SPDIF Out HI
Pin 17 – IFB AES/SPDIF Out LO
Pin 16 – A AES/SPDIF In SH
Pin 15 – A AES/SPDIF In HI
Pin 3 – A AES/SPDIF In LO
Pin 2 – B AES/SPDIF In SH
Pin 1 – B AES/SPDIF In HI
Pin 14 – B AES/SPDIF In LO
Typical DB-25
connector