I N P U T P A N E L
page 4
D-12 / July 2006
Input Panel (IS-D12)
Controls and Functions
Each input panel of the D-12 digital audio control
surface has four identical strips representing four input
channels.
Programmable Section
Each input has a programmable encoder, 8 character
display, and switch. The user may map any centrally
located function included in the function “list” to this
rotary knob/display/switch. The function mapped to the
Programmable section is mirrored in the central section
when the input SET button is pressed.
A list of available functions (see table on the page
2-8) is accessed by pressing and holding the Program-
mable Encoder for 3 seconds. After 3 sec, the user scrolls
through the available functions until the desired function
is displayed, and selects it by pressing the Programmable
switch. The Programmable switch will light if the dis-
played function is already assigned to the channel, or
otherwise will flash. To change to a new function, repeat
the process.
Programming Example: Setting up a Gain control
knob with Phantom Power switch.
1 - Press an input fader SET button.
2 - Press and HOLD the programmable encoder for 3
sec.
3 - Rotate the encoder through the list until GAIN is
displayed.
4 - Press the Programmable switch.
5 - The current gain setting in dB is displayed.
Rotating the programmable encoder adjusts line or mic
gain depending on the input source. Pressing the pro-
grammable switch turns on/off phantom power if the
source is a mic; otherwise the switch is inactive.
