M I X - M I N U S P A N E L
page 12
D-12 / July 2006
You can set the level of each channel feeding AUX SEND 1
independently. The AUX 1 control affects the signal level to AUX
SEND 1 of the channel that currently has its SET button lit. Thus you
can generate a mix to AUX SEND 1 from several channels if desired.
Once you have the desired channel(s) feeding AUX SEND 1, you
can adjust the output level of AUX SEND 1 by using the AUX
SEND 1 MASTER, the knob labeled “1” in the MASTERS
area. The actual destination that AUX SEND 1 is routed to is
assigned by first pressing the AUX SEND 1 SET button, then
dialing up the desired destination on the DESTINATION
knob on the XYE-D12 panel and pressing the associated
TAKE button.
AUX SEND 1 can be mono or stereo. Press the AUX
SEND 1 button, then press the appropriate MODE button on
the SUR-D12 panel. If AUX SEND 1 is in STEREO mode,
and if the selected channel is in STEREO mode as well, the
AUX 1 control will act as a BAL control if it is pressed down
while being turned. If the selected channel is in MONO, the
pressed action of AUX 1 is as a PAN. If the AUX SEND 1 is
in MONO mode, the AUX 1 knob does nothing if you press
it while turning. NOTE that surround sends are not created.
A surround source will send a desired stereo to a stereo AUX
SEND.
The AUX SEND 1 AFL switch routes a post AUX 1 level control
signal to the SOLO mix.
AUX SEND settings are shown on the LCD displays.
AUX SENDs 2 - 8 work in the same manner as AUX SEND 1.
SUR-D12 Panel
XYE-D12 Panel
