manualshive.com logo in svg

Wheatstone Corporation GPC-3 Studio turret, Technical Manual, Page: 47 / 95

Share
Download
Wheatstone Corporation GPC-3 Studio turret Technical Manual Download Page 47

G P - 8 P / G P - 1 6 P   S O F T W A R E

page  2 – 14

GPC-3 / Jan 2006

The auto-generated script code for the first two buttons will assert the

input LIO while the button is pressed and de-assert the input LIO when the
button is released. The button LED will light to indicate that the corre-
sponding output LIO is active.

The auto-generated script code for the third and fourth buttons will

assert the input LIO while the button is pressed and de-assert the input LIO
when the button is released. The button LED will light to indicate that the
button is down.

The following script will be generated. The button 1 and 2 actions

simply drive the LIOs and LEDs corresponding to the buttons. A periodic
timer drives the button 1 and 2 LEDs with the value read from the LIO
corresponding to those buttons. The button 4 and 5 actions simply drive the
LIOs and LEDs corresponding to the buttons.

Summary of Contents for GPC-3 Studio turret
































































































Reviews:

No comments