page 3 – 11
EDGE Network / Jan 2016
E D G E G U I
EDGE GUI Menu
File
The File menu contains items for setting a password
and for exiting the program:
•
Set Password... – Used to set a password that will
need to be entered to operate the Wheatnet Edge
Setup
GUI – when first installed the GUI requires
no password – to set a password you must enter the
current password and then enter the new password
twice (the second to confirm the password).
•
Exit – Used to exit the EDGE GUI.
View
The View menu is used to show or hide certain sections
of the Wheatnet Edge Setup GUI or to change the GUI
appearance:
•
Devices – Used to show or hide the Devices section.
•
System Info – Used to show or hide the System
Info section.
•
Stylized – Used to toggle the Wheatnet Edge Setup
GUI between a modern appearance and a more
traditional one.
WheatNet-IP System
The WheatNet-IP System menu is used to manage signal
sets within the EDGE GUI:
•
File Open... – Used to open a saved signal set.
•
File Save... – Used to save the current signal set.
•
System Scan... – Used to scan the system to which
the Wheatnet Edge Setup GUI is connected to get a
list of all signals currently available in the system
– this set can then be saved using File Save... and
then later recalled using File Open... even if the
EDGE is not connected to the system at that time.
