4
Setting Up a Home Theatre System
Placement
Front and E
ě
ects Channels:
The front loudspeakers are placed on either side of the television screen, 2 to 3 metres apart. The speakers should
be angled slightly so they car aimed towards the listeners.
We recommend placing the rear e
ě
ects speakers in a high position, behind the listener’s head. If the rear or side walls are a long way from the
listening seat, consider stand mounting the loudspeakers. If the centre loudspeaker is very high or low, angle it towards the listener’s ear level.
The front faces of the centre and surround loudspeakers should also be in line as far as possible.
Subwoofer:
As the ear is unable to detect the direction from which deep bass originates, you have freedom to position the unit. Varying the
distance from the wall alters the bass. Placing the subwoofer across a corner boosts the bass but may impair clarity. The performance of a home
theatre system can be enhanced by using two subwoofers.
6.1 and 7.1 System Placement
Dolby Labs, DTS and THX offer 6.1 and 7.1 format. Although
the precise configuration of these systems will depend on the
capabilities of your processor and you should be guided by those
instructions, we would make some observation.
For 6.1 and 7.1 formats the listening seat should not be too close to
the rear wall.
Optimising the time delay so that information from all speakers
arrives the listening seat coherently is critical of the bene
ę
ts of these
systems are to be fully realised.
Dolby Labs Recommended Placement for Multichannel Home
Theater Systems
Connecting Centre Loudspeaker
The Centre channel speaker may be connected as shown, or bi-wired.
LFE
Summary of Contents for Diamond 11.0
Page 12: ...2 4 metres I 200mm 700mm 200mm 2 4m 11 ...
Page 13: ...C L L 12 ...
Page 15: ...5 1 14 R E B SUB WOOFER 5 1 DFS 6 1 DFS I I I I SUB WOOFER 7 1 DFS SUB WOOFER ...
Page 19: ......
