2
The 11.3, 11.4 and 11.5 models are designed to be
Ě
oor standing. We suggest that they are positioned at least 200mm from the rear walls and
700mm from the side walls, facing slightly inwards. The 11.0 and 11.1 11.2models should be stand or wall mounted though they may be placed
on a rigid shelf. The bass extension will improve if the small speakers are operated closer to the rear wall.
If the loudspeakers are placed too close to the walls the bass will increase but may be boomy and indistinct. If the loudspeakers are placed away
from the walls, the inward angle may be increased by up to 40%, although this may restrict the width of the optimum listening position.
A useful rule of thumb is that the listener should be as for from the loudspeakers as they are from each other. The speakers should ideally be
positioned so that the treble units are roughly at ear level to s seated listener. As personal taste plays a large role, experiment with di
ě
erent
con
ę
gurations and play a wide range of programmes before
ę
nalising the position of your speakers.
Positioning the Front Loudspeakers
The centre channel loudspeaker should be positioned centrally between the loudspeakers, close to
the television and mounted above or below the screen.
The loudspeaker should be located on a stable
Ě
at surface to avoid any cabinet movement at high
sound levels. If you mount the unit above the television, move it forward so that the front grille sits
slightly in front of the screen and the top of the cabinet.
A custom stand is available for the model which allows the loudspeaker to be positioned under a
wall mounted monitor and has an adjustable vertical tilt for optimal dispersion.
Positioning the Centre Loudspeaker
11.3 - 11.5
11.0 - 11.2
Positioning Surround Loudspeakers
Diamond11.SR Surround Loudspeakers
The speakers should ideally be sited 600 mm-1.5 metres above the listening position and 2.5-3.5 metres
apart, central to the listener and behind the listening position, preferably on a rear wall. If the listening
position is some distance from a rear wall, the speakers may be mounted on opposite side walls but
always behind the listening position.
Ensure that the wall is sound and can support the product. Drill two 5mm holes in the wall 180mm
apart.
Fix a suitable No 8 round head screw
ę
rmly into each hole using appropriate wall plugs. Leave a stub of
5mm protruding from the wall.
Connect the loudspeakers. Align the holes in the mounting brackets over the screw and carefully lower
the unit onto the screws.The speaker should now be securely a
Ĵ
ached with the spacers resting against
the wall. Now connect the speakers to the ampli
ę
er.
Summary of Contents for Diamond 11.0
Page 12: ...2 4 metres I 200mm 700mm 200mm 2 4m 11 ...
Page 13: ...C L L 12 ...
Page 15: ...5 1 14 R E B SUB WOOFER 5 1 DFS 6 1 DFS I I I I SUB WOOFER 7 1 DFS SUB WOOFER ...
Page 19: ......