5
Assembly Instructions
NOTE
: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back
and fully tighten all bolts. This will make the assembly easier.
1.
Unpack the unit and confirm that you have all the hardware and required parts.
2.
Locate the Lower Spine (D) and set back face down on a scratch free surface.
3.
Align and attach 2 Shelf Frames (B and C) to the Lower Spine (D) with four 7/8” Bolts (4). Make sure
that the inside corner plates on the shelf frames will face up when the unit is turned upright.
NOTE
: The Middle Shelf Frame (B) is adjustable. Choose the upper hole sets to increase the bottom
space.
UP
D
C
B
4
4
4
D
C
B
D
④
x 4
