22
Assembly Instruction for installing the Mounting Frame onto a BRICK,
SOLID CONCRETE OR CONCRETE BLOCK WALL
NOTE:
If you are mounting your TV to a wall with wooden studs, skip this section.
This
assembly
requires an
electric drill and level (not included).
36.
Begin by placing the Mounting Frame (M) level against the wall where you intend to mount the TV.
Using the Mounting Frame (M) as a template, mark 4 drill points with a pencil.
37.
With an electric drill (not included) on its low setting, drill 7/16 inch (11 mm) diameter holes to at least
2½ inch (63.5 mm) deep. Insert the Concrete Anchors (10) into the pre-drilled holes so that they are
flush with the wall.
38.
Place the Mounting Frame (M) level in the desired position against the wall. Secure the Mounting
Frame (M) to wall with the Lag Bolts (11) and the Washers (12) at the drill points. Tighten the bolts
firmly, but be careful not to over tighten.
Maximum weight 61.2 kg /135 lb
Concrete Anchors should only be used for masonry mounting.
NEVER use the wall anchors to mount the unit to drywall.
1
1
m
m
/
0
.4
in
/
p
o
407 mm
16 in / po
166 mm
6.5 in / po
63.5 mm
2.5 in / po
