CARE AnD MAInTEnAnCE
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner. Make sure to dry the wood immediately
with a soft cloth or towel.
• The marble top can be cleaned using standard marble cleaning agents (sold separately).
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch; for worn areas, stroke in direction
of wood grain. Rub excess colorant promptly with a soft cloth.
• Keep product away from direct sunlight as it may damage the finish.
This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship,
the manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled
incorrectly, misused, abused by overloading, altered in any way or damaged due to accident. This warranty is not transferable
and does not cover chipping, flaking, scratches, rust, dents, or other damages to the surfaces of this product. Responsibility
of the manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential,
incidental, or other damages or losses resulting from product failure.
This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may
have other rights which vary from state to state.
5
4
OnE-YEAR LIMITED WARRAnTY
REPLACEMEnT PARTS LIST
PART
DESCRIPTIOn
PART #
C
Backsplash
*LWS60DCVAG-01-B
D
Vanity Foot
*LWS60DCVAG-02-VF
E
Support Leg
*LWS60DCVAG-03-SL
F
Tip Out Drawer
*LWS60DCVAG-04-TOD
G
Small Drawer
*LWS60DCVAG-05-SD
H
Medium Drawer
*LWS60DCVAG-06-MD
I
Large Drawer
*LWS60DCVAG-07-LD
J
Left Door
*LWS60DCVAG-08-LD
K
Right Door
*LWS60DCVAG-09-RD
AA
Touch-up Pen
*LWS60DCVAG-10-TP
BB
Bolt
*LWS60DCVAG-11-B
CC
Lock Washer
*LWS60DCVAG-12-LW
DD Flat Washer
*LWS60DCVAG-13-FW
EE
Wood Dowel
*LWS60DCVAG-14-WD
FF
Hex Wrench
*LWS60DCVAG-15-HW
GG
Door Pull with Bolt
*LWS60DCVAG-16-DPB
HH
Slow Close Hinge
*LWS60DCVAG-17-SCH
II
Drawer Slides
*LWS60DCVAG-18-DS
JJ
Leveler
*LWS60DCVAG-19-L
AA
BB
GG
CC
HH
DD
EE
II
JJ
E
F
G
D
C
H
I
J
K
FF
Printed in Vietnam
Date: 2019-07-24
Rev. 0001-A
For replacement parts, call our customer service department at 1-866-942-5362, 8:30 am – 4:30 pm,
PST, Monday to Friday.
ASSEMBLY InSTRUCTIOnS
4
5
4a. If the doors preassembled to vanity base (B) require adjustment,
follow the below options as needed:
To adjust door up or down, loosen screws (a), adjust door and retighten
screws.
To adjust door left and right, turn screw (b) in or out.
To adjust door in and out, loosen screw (c), adjust door and retighten
screw.
5a. Open the preassembled drawer as far as possible.
5b. Simultaneously press the right side spring clip downward and the left side
spring clip upward.
5c. Once both spring clips are held in the indicated position, pull the drawer
straight out.
Step 4: Hinge Adjustment For Door Alignment
Step 5: Vanity Drawer Removal
B