background image

Declaration no.: EU-753.133-000

We the undersigned:

Name of manufacturer: 

Munster Simms Engineering Ltd

Address: 

277 – 279 Old Belfast Road, Bangor, BT19 1LT

Country: 

Northern Ireland

Declare under our sole responsibility that the following apparatus:

Product description: 

Pump controller

Model name and no.: 

Watermaster® IC EP1632

Brand name: 

Whale

Is in conformity with the following relevant EU Legislation:

EMC directive 2004/108/EC

LVD directive 2006/95/EC

Based on the following harmonized standards:

EN55014-1:2000 

EMC Emissions

EN55014-2:1997 

EMC Immunity

And therefore complies with the essential requirements of those directives.

Additional information:

Technical file number: 

TF-753.133-000

Location of technical file: 

Munster Simms Engineering Ltd, 277-279 Old Belfast Road , Belfast, BT19 1LT

Year mark first applied: 

2012

Limitations of use: 

For use with EP1612 12V submersible pump only

Name and position of person binding the manufacturer or authorized representative:

Signature:

Name: Stanley McFarland

Function: Engineering Director

Location: 

Munster Simms Engineering Ltd

277 – 279 Old Belfast Road, Northern Ireland, BT19 1LT

Date of Issue: 

27.03.12

CE marked

Watermaster® IC is protected by the following pending Patent Application

Patent UK patent application no. 1017025.6

WHALE® and Watermaster® are registered trademarks of Munster Simms Engineering Limited, Bangor, Northern

Ireland trading as Whale®. WHALE IC™ and IC Intelligent Control™ logo device are trademarks pending registration

of Munster Simms Engineering Limited, Bangor, Northern Ireland trading as Whale®.

8

14. 

PATENTS AND TRADEMARKS

13. 

EU DECLARATION OF CONFORMITY, STANDARDS & APPROVALS

Summary of Contents for EP1632










Reviews: