5Qty 1 Watermaster® IC - controller
Qty 1 Securing screw
Qty 1 Watermaster® with plug and 12V d.c. High Flow Pump
•
No extra parts are required to complete the system
•
If you need to replace the pressure switched socket – part number ES1001
•
If you need to replace your Watermaster® pump – part number EP1612
Please note - The manufacturer cannot be held responsible for claims arising from incorrect installation, unauthorised
modification or misuse of this product.
Before installing, please check that the submersible pump can reach the bottom of the water container and that there
is access to the back of the socket.
TO CONNECT THE IC CONTROL UNIT (BACK OF SOCKET)
Step 1 - Switch off the 12V d.c. supply at the main panel (isolator switch)
Step 2 - Unplug the spade connections on the water inlet socket – ensuring that you note the order of wires for
reconnection with the Watermaster® IC (see Fig. 1 & Fig. 2)
Step 3 - Unscrew and remove the pressure switch adjusting screw and locking nut (see Fig 2)
Step 4 - Remove securing screw (see Fig. 3)
Step 5 - Take Watermaster® IC and place countersunk screw into screw hole (see Fig. 4)
4
5.
OPTIONAL EXTRAS
6.
INSTALLATION
Fig. 1 Watermaster
®
IC features
Pressure switch
adjusting screw & lock
nut (REMOVE
)
Fig. 2 Wiring connections Watermaster
®
socket
Fig. 4 Place Securing Screw into
Watermaster
®
IC
Fig. 3 Preparing Watermaster
®
socket for
Connecting Watermaster
®
IC and Removing the
Securing Screw
4.
PARTS LIST
