1.
TYPICAL INSTALLATION
12. PLUMBING
2.
SPECIFICATION
13. INSTRUCTIONS FOR USE
3.
CONTENTS AND DIAGRAMS
14. MAINTENANCE
4.
PRINCIPLES OF OPERATION
15. HELPFUL HINTS
5.
TO THE USER
16. TROUBLE SHOOTING
6.
TO THE FITTER
17. WINTERIZING
7.
APPLICATION
18. SERVICE SUPPORT DETAILS
8.
WARNINGS
19. PATENTS/ TRADEMARKS
9.
PARTS LIST
20. WARRANTY STATEMENT
10. OPTIONAL EXTRAS
21. EU DECLARATION OF
11. INSTALLATION
CONFORMITY, APPROVALS
LIST OF DIAGRAMS:
FIG 1
GULPER® IC - TYPICAL INSTALLATION AS A REMOTE MOUNTING
BILGE PUMP FOR USE WITH WHALE STRAINER IC
FIG 2
PUMP ORIENTATION
FIG 3
GULPER® IC INSTALLATION
FIG 4
INSTALL P CLAMP
FIG 5
STRAINER IC CONNECTION
FIG 6
STRAINER IC CONNECTION
FIG 7
WIRING GULPER® IC TO STRAINER IC
FIG 8
CONNECTING SWITCHING CABLE THROUGH BULKHEAD
FIG 9
CONNECT DEUTSCH® CONNECTORS
FIG 10
SECURING PIPEWORK
FIG 11
STRAINER IC OPERATION TEST
FIG 12
FOR CLEANING - DETACH TOP COVER OF STRAINER IC
FIG 13
FOR CLEANING - UNSCREW VALVE HOUSING
IC - Intelligent Control Technology
At the heart of every Whale® IC product lies innovative electronic control circuitry built
in. This enables IC sensor accessories to communicate directly with IC pumps to
control their performance. These accessories send signals to built-in intelligent
software which then control the pumps to react as required.
Gulper® IC
The Gulper® IC fully automatic self-priming pump is designed as a remote mounting
bilge pump. Output capacity depends on installation and operating conditions.
REMOTE MOUNTED BILGE APPLICATION
Save time and money by reducing four separate components to one pre-wired
system. Remote mounting automatic Gulper® IC receives signals from Strainer IC
3. LIST OF CONTENTS AND LIST OF DIAGRAMS
4. PRINCIPALS OF OPERATION
