TIMER
Interface path: HOME/MON.→ [GENERAL MENU] → [TIMER]
This timer function can be used for a variety of timings such as the total flight duration and the specific
time of the game. Timer 1 and Timer 2 can be set and displayed on the main standby screen.
The timer is an independent function in each model. When the model is changed, the timer
corresponding to the new model will be automatically recalled.
The timer can be started or stopped by operations such as switches or ticks. And the direction of the start
and stop switches can be set automatically. Positive timing and countdown can be set to a maximum of 99
minutes and 59 seconds.
Interface page
Remaining time:
reminder
once every 1 minute the
remaining time of the distance
alarm reduced every 1 minute.
Timed completion
: according
to the set time prompt.
Reminder every minute:
ring
for 1 minute.
Minute:0-99;Seconds:0-59
Reset, start, close, it can be
operated by switches and the
like.
Down: decrease from the set
time
UP: starting from 0,
increasing with time
INH, turn off the power or replace the new model and reset the
timer to zero clearing.
ACT, Memory of the previous timing data while rebooting.
Timer No.
5 Switch setting, the start switch is set to “SA/2
gear”, the stop switch is set to “SA/1 gear”, and the
reset switch is set to “SA/0 gear”. (So we can control
the timer 1 with just one switch). After the activation
and activation effect: the timing starts, the reminder
becomes a continuous “tick-tick-tick...” sound when
the remaining 20 seconds, and the reminder
becomes continuous “ticktick-ticktick-tick” when 10
seconds left. The sound of “tick...", at the end of the
countdown, there will be a long beep with the
vibration of the type "Vibration 1"; then the timing
will continue and show a negative value.
1 Time setting, as shown on the right, warning bar,
the left minute value is adjusted to “15”, and the
right side is set to “Remaining time”.
3 Vibration setting, vibration is set to “Vibration
1”.
2 Mode setting, mode is set to “countdown”.
4 Memory setting, open as needed, keep the
default here.
Case Setting (timer 1 15 minutes countdown,
ringing alarm, open vibration, switch SA
control):
Model time:the accumulated time of model
working,the account unit is hour-miunte-second.
Control mode:boot timer, or switch/stick(such as
throttle stick)
50
GENERAL MENU
Summary of Contents for ET08
Page 83: ...83 ...
