background image

Limited Warranty

What This Warranty Covers 

This is a “Limited” warranty. This warranty covers any defects in materials and workmanship and 

warranty only applies to the original purchaser and is not transferable. This warranty is also only 

valid if the original purchase was made from an authorized Wet Sounds™ dealer.  

How Long Coverage Last s

This warranty runs for 2 years from the date of the purchase. It is recommended to REGISTER 

your warranty online within 45 days of your purchase at www.wetsounds.com - click on “war-

ranty registration”.  

What Is Not Covered  

This warranty does not cover fading or discoloration caused by exposure to sunlight or chem-

icals such as ammonia, household bleach, or any cleaning material that contains abrasive 

substances. (For information on how to prevent fading or discoloration, consult for recom-

mendations on cleaning products) Wet Sounds, Inc. does not cover the cost for removal and 

reinstallation of any kind. Additionally, shipping TO Wet Sounds, Inc. is covered by the purchaser 

This warranty is void and inapplicable if Wet Sounds™ deems that the product was abused 

or misused; including but not limited to Speaker product that has been improperly-powered 

(under or over powered), causing thermal (burnt voice coil) and/or mechanical failure (torn 

surrounds or spiders), damage caused by accident, mishandling, improper installation, neg-

ligence, normal wear and tear, excessive water or heat damage, freight damage or prod-

ucts that have been altered in any way. Product owned by anyone other than the original 

purchaser from an authorized Wet Sounds dealer. (The warranty is not transferable and will not 

apply to products purchased from unauthorized dealers.) Wet Sounds is not responsible for any 

damages to a consumer’s boat or person from a product failure. The warranty is void if Wet 

Sounds deems the product was installed or used improperly. Wet Sounds shall not be responsi-

ble for any incidental or consequential damages, except to the extent provided (or prohibited) 

by applicable law. This warranty gives you specific legal rights, and you may also have other 

rights which vary from state.

What Wet Sounds™, Inc. Will Do  

Wet Sounds, Inc will repair any part of your product that proves to be defective in materials 

or workmanship. In the event repair is not possible, Wet Sounds, Inc will replace the product in 

question. If it is deemed necessary Wet Sounds, Inc. will either replace the entire product with a 

refurbished unit or it will be replaced with a model that is similar in price if that model is no lon-

ger available. Labor cost and materials needed to complete this service will be at no charge 

to the purchaser. Additionally, the cost of shipping TO the consumer is also covered under this 

warranty.

How to Obtain Warranty Service  

Contact Wet Sounds, Inc. either by phone at 877-938-7757 or by email at 

[email protected]. A service representative will assist you in the necessary actions to 

verify that the problem that you are experiencing is covered under warranty. If it is in fact a 

warranty issue, Wet Sounds will issue an RA number for tracking purposes and give instructions 

on sending the product in for evaluation. Wet Sounds™, Inc. How State Law Applies This war-

ranty gives you specific legal rights, and you may also have other rights which vary from state 

to state. 

Internet Warning  

Wet Sounds, Inc. products sold on any non authorized web site or internet auction site are void 

of any and all manufacturer’s warranty. Please contact Wet Sounds™ at 877-938-7757 or visit 

our web site at www.wetsounds.com to search for an authorized site and/or an authorized 

retailer near you. 

 

Caution & Respect 

Wet Sounds™ speakers can achieve very high sound pressure levels.  Please use this product 

responsibly.  Be aware that sound travels great distances across water so please respect other 

boaters especially while loading/unloading at the ramp or dock. Wet Sounds, Inc. is not respon-

sible for any violations of the law that may be a direct result of excessive volume. Please abide 

by the rules but have fun doing it.

Wet Sounds REV 10 HD & REV 12 HD Owner’s Manual

Wet Sounds REV 10 HD & REV 12 HD Owner’s Manual

13

14

RGB Wiring

For sound response and multi color control an optional RGB 

controller will be needed. For single color wiring with an external 

switch see diagram below.

Splice and combine the ground wires to yield different colors. Insure to add a fuse to your

power for protection.

Grille/Badge Alignment

Each LED ring on each pod has an arrangement of screw holes 

around the ring to be able to “Clock” the Grille’s position once 

POD orientation is determined. The same goes with the rear LED 

badge.

fuse

1. Adjust pod orientation

2. Unscrew grille and 

“clock” to desired position

3. Fasten the grille in its

new position

1. Adjust pod orientation

2. Unscrew badge and 

“clock” to desired position

3. Fasten the badge 

in its new position

Summary of Contents for REV 10 HD










Reviews: