18
Westward Operating Instructions and Parts Manual 1KEN3, 1KEN4
10”,12” Drill Presses
Changing the laser batteries (Figure 31)
• Unplug your drill press.
Failure to unplug your tool could
result in accidental starting causing possible serious
personal injury.
1. Open the battery cover (1).
2. Remove and replace the two batteries.
3. Replace the battery cover.
NOTE:
Replace the batteries with batteries that have a rating
of 1.5 volts (AAA size or equivalent). When replacing the
batteries, the battery guide should be thoroughly cleaned. Use
a soft paintbrush or similar device, to remove all sawdust and
debris.
Figure 31
1
WARNING
!
