Adjusting Settings
15
ENGLISH
3.5
Television Settings
3.5.1 Setting Channels
When connected to a television
antenna or CATV cable, the LCD
display can automatically scan
for available channels. Before
scanning, make sure you have
selected the correct TV signal
source: air (broadcast) or CATV
(cable TV).
To scan for channels:
1
Press
MENU
to turn the OSD
on.
2
Press
VOL+
to switch to the
TV menu.
3
Press
PRG/CH
to select
CH-Scan.
4
Press
VOL +
to begin scan-
ning channels.
5
The screen displays a number incrementing from 1 to 125 (for NTSC
systems in the USA and other countries) as the LCD display scans for
available channels.
6
Scanning is complete when the channel number stops incrementing
(125 for NTSC systems). The channel switches back to the first avail-
able channel found.
NOTE:
Several minutes are required for channel scanning to complete.
TV
CH-Scan
C.CPT
OFF
AIR
V-Chip
TV-SYSTEM
GRB
TV
GRB
CH-Scan
C.CPT
OFF
CATV
125
V-Chip
TV-SYSTEM
nextgen-nt2001 Page 15 Tuesday, July 8, 2003 9:08 AM
