Getting to Know Your LCD Display
10
2.9
Built-in Speakers
The LCD display comes with a pair of built-in stereo speakers located at the
front of the unit.
2.10 Connecting the AC Power Adapter
You must use the 100-240 VAC/60W power adapter that is included with
the LCD display.
Caution:
•
Make sure you have read and understood the safety notes
before connecting the LCD display to the power adapter and
electrical outlet.
•
Do not use any other AC power adapter except the adapter that
was included with your LCD display.
•
Contact your dealer if you need a replacement adapter.
1
Connect the power cord to
the AC adapter.
2
Plug the power cord into an
electrical outlet. Contact your
dealer or a qualified service
technician if the plug does
not fit into the outlet.
3
Insert the small end of the
adapter cord into the DC-in
connector at the back of the
LCD display. The power
LED on the front panel glows
orange.
2.11 Turning On the LCD Display
1
Press the Power key on the LCD display control panel or remote con-
trol to turn the LCD display on. The power LED on the front panel
glows green.
2
Press either Power key again to turn the LCD display off. The power
LED on the front panel glows orange.
nextgen-nt2001 Page 10 Tuesday, July 8, 2003 9:08 AM
