5
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-598204-RevB
ECO #: W19-0107
DATE: 08/06/19
7. Back up Lights can be installed in the two specified middle locations of the bumper. Install lights per manufacturers
instructions. Install through the back side of the bumper.
See Figure 9.
Note:
It is recommended to install the lights in the
bumper prior to mounting the bumper on the vehicle.
OPTIONAL STEP
Mount through back side of bumper
Fig 9
12. Slide the M14 Nut Plate (2) into the frame. Lift the WJ2 Rear Bumper Assembly (1) onto the frame rails.
See Figure 10.
13. Using the supplied M14 Hardware (10-12) loosely install the bumper to the frame in the same bolt locations as the OEM
bumper.
See Figure 11.
Factory Sensor
Item 20
Item 21
Item 17
Item 23
Item 22
Fig. 7
Driver side Shown
Fig. 8
21
17
23
20
22
Factory Sensor
Passenger side Shown
