4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-598204-RevB
ECO #: W19-0107
DATE: 08/06/19
Fig 5
8. Remove the four parking sensors from the OEM bumper. Pay attention to the orientation of the sensors. They must be
installed in the same orientation. Handle sensors with care, they are very delicate .
9. Use the Sensor Tab (23), the Foam Gasket (22) (between tab and sensor), and the supplied M6 Hardware (17, 20, 21) to
install the sensors in the four locations as shown in
Figure 6-8.
10. Carefully route the harness around the bumper.
Note: Zip ties or double sided tape can be used to route harness and to hold the sensor in position.
PARKING SENSOR INSTALLATION
Sensor Locations
Fig. 6
