17
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-598204-RevB
ECO #: W19-0107
DATE: 08/06/19
Fig 21
The M3 Screws will be used in all three mounting locations
Fig 20
Feed camera wire
through here
Tighten to Adjust
Tighten to Adjust
Fig 18
Fig 19
1
9
29
31
28
Set Screw
20. Before mounting the rear view camera, use the supplied Corrugated Sleeve (36) to wrap the areas of the wire inside the tire
carrier.
Note:
The wire can be fed through the access hole in the Tire Carrier (1). See Figure 20.
21. Obtain the Camera Mounting Bracket (11) and attach the camera using the supplied M3 Screws (13).
See Figure 21.
22. Slide the camera into the Camera Extension Bracket (11) and secure it using the supplied M6 Hardware.
See Figure 22.
Note: There is a small amount of adjustment for the camera by loosening the bolts and adjusting using the access hole on
the underside of the Extension (11).
23.
DRIVE THE VEHICLE FOR 50-75 MILES. THEN READJUST TURN-BUCKLES AND RE-TORQUE
MOUNTING HARDWARE.
