9
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-583110-RevA
ECO #: W18-0083
DATE: 09/11/18
16. Attach the Bumper to the Brackets with the included (6) 12mm x 45mm Hex Bolts, (12) 12mm Flat Washers and (6)
12mm Nylon Lock Nuts,
(Figures 20 & 21)
. Snug but do not tighten hardware.
17. Level and adjust the bumper and fully tighten all hardware to 65-70ft-lbs.
NOTE
: If additional in-out adjustment is re-
quired, loosen Frame Bracket Hardware, slide the Bracket in or out as necessary and fully tighten all hardware.
18. Reattach the wiring harness. Adjust lights as necessary and tighten all fog light bracket hardware.
(3) 12mm x 45mm Hex Bolts
(6) 12mm Flat Washers
(3) 12mm Nylon Lock Nuts
Fig 20
Fig 21
19. Use the included (2) push-in plastic nuts to attach the front license plate, (if required), to the (2) holes in the front bumper,
(Figure 22)
.
20. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
Fig 22
