5
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-583110-RevA
ECO #: W18-0083
DATE: 09/11/18
7. Insert (1) 12mm Double Nut Plate into the open end of the frame. Attach the Frame Bracket to the bottom of the frame and
the Double Nut Plate with (2) 12mm x 45mm Hex Bolts, (2) 12mm Lock Washers and (2) 12mm Flat Washers,
(Figures 5
& 8)
.
NOTE:
On models with tow hooks, reuse the factory nut plate and hardware to install the Frame Bracket. Leave
hardware loose at this time.
(1) 12mm Double Bolt Plate
(2) 12mm x 45mm Hex Bolts
(2) 12mm Lock Washers
(2) 12mm Flat Washers
Fig 8
8. Select the passenger side Frame Support Bracket,
(Figure 9)
. On models without tow hooks, attach the Support Bracket
directly to the top of the Frame Bracket with (2) 12mm x 45mm Hex Bolts, (4) 12mm Flat Washers and (2) 12mm Nylon
Lock Nuts,
(Figure 10)
. Do not tighten hardware at this time.
Fig 9
Re-use factory
hardware
Fig 10
